Learn how to steam block your knitting projects with this step-by-step photo tutorial. You’ll never have to worry about your projects losing their shape again!
Checkout this video:
What is Steam Blocking?
Steam blocking is a method of finishing your knitted or crocheted project by Steam blocking is a method of finishing your knitted or crocheted project by steaming it with an iron. The steam will help to even out stitches and block your piece into the desired shape. It’s a good idea to steam block whenever you finish a project, especially if you plan on giving it as a gift or wearing it yourself.
Why Should You Steam Block Your Knitting?
There are a few different reasons why you might want to steam block your knitting. First, it can help to even out the stitches and make your knitting look neater overall. Second, it can help to open up the fabric and make it easier to work with. Finally, steam blocking can also help to set the shape of your knitting so that it holds its shape better over time.
How to Steam Block
One of the best ways to achieve perfectly even stitches and edges on your knitting is to steam block it. This method is most commonly used for finishing garments made with lace or other delicate fibers, but can also be used to fix wonky stitches or to shape certain garment pieces. Here’s a step-by-step guide on how to steam block your knitting.
1. Gather your supplies. You will need a clean towel, an iron, and a spray bottle filled with water.
2. Place the towel on an ironing board and set the iron to the “steam” setting.
3. Hold the knit piece against the towel and press the iron down onto it, being careful not to touch the iron directly to the knitting. You should see steam coming out of the iron onto the towel and knit piece.
4. Continue steaming all areas of the knit piece until it is evenly saturated with moisture.
5. Allow the knit piece to air dry completely before removing it from the towel.
Tips for Steam Blocking
Steam blocking is a method of wet blocking that uses steam from an iron or steamer to relax fibers and set the shape of your knitting. It is often used for wool garments since the steam can help to soften and shape wool fibers.
Here are some tips for steam blocking your knitting:
– Use a spray bottle to dampen your knitting before steaming. You don’t want it to be soaking wet, just evenly damp.
– Place your damp knitting on an ironing board or another flat surface.
– Using an iron on the steam setting, hold the iron about 6 inches above your knitting and moving it around so that the steam evenly hits all areas of your knitting. Use caution not to let the iron actually touch the knitting.
– Once your knitting is thoroughly steamed, allow it to dry completely before removing it from the blocking surface.
Common Mistakes to Avoid When Steam Blocking
There are a few common mistakes that people make when steam blocking their knitting. Here are a few tips to help you avoid them!
-One mistake is not using enough water. When you are steam blocking, you want to make sure that the fabric is damp all the way through, not just wet on the surface. Otherwise, the fabric will dry unevenly and you may end up with unwanted creases.
-Another mistake is using too much heat. You want to use just enough heat to dampen the fabric and help it relax into shape, but not so much that it scorches or damages the fibers.
-A third mistake is not letting the fabric cool completely before removing it from the blocking board or other surface. If you remove the fabric while it is still warm, it may stretch out of shape as you handle it.
How to Block Different Types of Knitting
Different types of knitting require different types of blocking. Read on to find out how to block different types of knitting.
Wool or other animal fibers:
Animal fibers can be steamed or wet blocked. To steam block, lay your garment flat on an ironing board and cover it with a damp cloth. Iron over the cloth until the garment is slightly damp. Remove the cloth and allow the garment to dry completely.
To wet block, soak your garment in cool water until it is saturated. Gently squeeze out the excess water and lay the garment flat on a towel. Roll up the towel and squeeze gently to remove more water. Lay the garment flat on a blocking board or bed and pin it into shape. Allow it to air dry completely before unpinning.
Cotton, linen, or other plant fibers:
Plant fibers should always be wet blocked because steaming can cause them to shrink. To wet block, soak your garment in cool water until it is saturated. Gently squeeze out the excess water and lay the garment flat on a towel. Roll up the towel and squeeze gently to remove more water. Lay the garment flat on a blocking board or bed and pin it into shape. Allow it to air dry completely before unpinning
When to Block Your Knitting
Before you can even begin to think about steaming your knitting, you need to know when to block it. In general, most knitters block their finished projects before they move on to the next step, whether that’s weaving in the ends or giving the item as a gift. Blocking is especially important if you’re making something that needs to fit a certain size, like a sweater or a hat. It can also help even out your stitches and make your overall knitting look neater.
That said, there are some items that don’t necessarily need to be blocked. For example, small items like dishclothes or socks usually don’t benefit from blocking, since they don’t have the same kind of shaping that larger items do. Additionally, some yarns (like wool) tend to hold their shape pretty well on their own and don’t require blocking in order to look nice. Ultimately, it’s up to you whether or not you want to block your knitting – if you’re unsure, err on the side of caution and go ahead and block it.
How Often Should You Block Your Knitting?
If you’re a knitting enthusiast, you probably know that blocking is an important step in finishing a handmade garment or accessory. Blocking opens up the fabric of your knitting, evens out stitches, and gives your project a polished look. But how often should you block your knitting?
The answer may surprise you: every time you wash your knitwear! Yes, that’s right – every time you wash or wet-block your knitted items, they will need to be re-blocked to retain their shape.
How often you need to re-block will also depend on how often you wear and wash your knitwear. For example, sweaters that are worn frequently will need to be blocked more often than those that are only worn occasionally.
The best way to prevent your knitwear from losing its shape is to store it properly when it’s not being worn. Be sure to fold or roll your items rather than hanging them, as this can cause them to lose their shape over time. And always use gentle cycles and cold water when washing – never put handknit items in the dryer!
Blocking Your Knitting Projects
To ensure your knitting projects look their best, it is important to block them before you wear or gift them. Blocking smooths out the fabric of your knitting and helps even out any imperfections. It also allows you to adjust the size and shape of your knitting as desired.
There are several different methods of blocking, but steam blocking is one of the most popular and effective ways to achieve professional-looking results.
Here is a step-by-step guide to steam blocking your knitting projects:
1. Gather your materials. In addition to your knitted project, you will need some blocking mats (or towels), T-pins, and a steam iron.
2. Fill a sink or bowl with warm water and gently wet your project all over, being careful not to agitate or stretch the fabric too much.
3. Squeeze out any excess water and lay your project flat on the blocking mats. Use the T-pins to secure the edges if necessary.
4. Using the steam setting on your iron, hold it about 6 inches above your project and gently wave it back and forth until the fabric is evenly dampened with steam. Be careful not to touch the iron directly to the fabric, as this can scorch or damage it.
5. Allow your project to dry completely before removing from the mats and wearing or gifting it!
FAQs About Blocking
Blocking is a process of using water and heat to even out your stitches and achieve the desired measurements for your finished project. It’s an important step for any knitter, but it can be especially helpful if you’re working with a delicate yarn or intricate pattern.
There are a few different ways to block your knitting, but the most common is steam blocking. This method uses steam from a kettle or iron to relax the fibers of your knitting and make them easier to shape. It’s a quick and easy way to get professional-looking results.
Here are a few frequently asked questions about steam blocking:
· How do I steam block my knitting?
To steam block your knitting, you’ll need to wet your project with clean water. You can do this by submerging it in a sink full of water or spraying it with a misting bottle. Once your project is wet, lay it out on a flat surface and begin steaming it with an iron or kettle. Be careful not to touch the iron directly to your knitting, as this can scorch the fibers. Hold the iron about six inches above your project and move it slowly back and forth until the entire piece is evenly steamed.
· What type of yarn can I steam block?
Most yarns can be steam blocked, but delicate fibers like silk or linen will require extra care. If you’re not sure whether your yarn can be steamed, test it on a swatch first before steaming your entire project.
· Can I use an ironing board to steam block my knitting?
Yes, you can use an ironing board to steam block your knitting, but make sure that the surface is clean and free of any lint or debris before you begin. You may also want to cover the ironing board with a clean towel to protect your project from direct contact with the board itself.