Learn how to make a headband out of knit fabric with this step-by-step tutorial. You’ll need just a few supplies and it’s a great beginner sewing project.
Checkout this video:
Gather your materials
In order to make a headband out of knit fabric, you will need the following materials:
-Measuring tape or ruler
-Sewing machine and thread
Once you have gathered all of your materials, you will be ready to begin creating your own headband!
Cut your fabric
Start by measuring the amount of fabric you need. You will need a piece that is at least 6 inches wide and 22 inches long. If you are using a patterned fabric, make sure to take into account the direction of the pattern when you cut your fabric so that it will be symmetrical when you wear it.
Once you have cut your fabric, fold it in half lengthwise with the wrong side facing out. Sew along the long edge, using a ½ inch seam allowance. Leave a small opening (about 1 inch) at the end so that you can turn the headband right side out later.
After sewing, use a sharp pair of scissors to trim the seam allowance down to ¼ inch. Turn the headband right side out and iron flat. Fold in the raw edge at the opening so that it matches the rest of the seam, then sew it shut.
Sew the fabric together
If you’re looking for a quick and easy project, why not try sewing a headband out of knit fabric? This project is perfect for beginners, as it doesn’t require any fancy techniques or expensive materials. All you need is some scrap fabric and a sewing machine (or even just a needle and thread).
To get started, cut two strips of fabric that are about 2 inches wide and 18 inches long. Then, simply sew the two strips together, making sure to leave a few inches at one end open so that you can turn the headband right-side out. Once you’ve done this, fold the headband in half and sew the two raw edges together.
And that’s it! Your headband is now ready to wear. You can even add a bit of decoration to it by sewing on a button or patch.
Attach the headband to your head
To make a headband out of knit fabric, you will need:
-1/4 yard of knit fabric (you can use an old t-shirt or buy some from the fabric store)
-a sewing machine
First, cut a strip of fabric that is about 2 inches wide and 18 inches long. Next, fold the strip in half lengthwise and sew along the long edge, using a zigzag stitch or a serger. Trim the edges if necessary. Finally, turn the headband right side out and stitch along each short end to form a loop.
Adjust the headband
Take the headband and adjust it so it is comfortable. You can make it tighter or looser by knotting the fabric. You may also want to try different widths to see what you like best.
Enjoy your new headband!
If you have a piece of knit fabric that you’re not sure what to do with, why not turn it into a headband? It’s a quick and easy project that doesn’t require any sewing. All you need is a piece of knit fabric and some scissors.
Cut a strip of fabric that is about 2 inches wide and long enough to wrap around your head. You can make it longer or shorter, depending on how tight you want the headband to be.
Tie the strip of fabric around your head, making sure that the ends are even. If the ends are not even, you can trim them so they are the same length.
Enjoy your new headband!