How to Loom Knit a Scarf in Five Easy Steps

This step-by-step tutorial will show you how to loom knit a scarf in five easy steps. With clear instructions and photos, you’ll be able to make your own scarf in no time!

Checkout this video:

Introduction

Loom knitting is a fun and easy way to make a variety of different items, including scarves. In this article, we will show you how to loom knit a scarf in five easy steps.

Before you begin, you will need to gather a few supplies. You will need a loom, loom knitting needles, and some yarn. Once you have your supplies, you are ready to begin!

Step One: Choose your loom. There are many different sizes and shapes of looms available, so choose one that is comfortable for you to work with. If you are new to loom knitting, we recommend starting with a small loom.

Step Two: Choose your yarn. Again, there are many different types and colors of yarn available, so choose something that you like. If you are new to loom knitting, we recommend starting with a light-colored yarn so that it is easy to see your stitches.

Step Three: Tie your yarn onto the loom. Start by tying the end of the yarn around one of the pegs on the loom. Then wrap the yarn around the loom until you reach the peg next to the one that you started with. Now take the yarn over that second peg and under the first peg (like you would if you were making a knot). Pull the yarn tight and continue wrapping the yarn around the pegs until all of them have been wrapped once. This will create your first row of stitches.

Step Four: Knit your scarf! Now it’s time to start knitting your scarf! To do this, simply take the bottom loop of yarn over the top loop and off of the peg (like you would if you were making a purl stitch). Then put the now top loop back on the peg (like you would if you were making a knit stitch). Repeat this process for each row until your scarf is as long as you want it to be!

Step Five: Bind off your scarf. When your scarf is as long as you want it to be, it’s time to bind off. To do this, simply take the first two loops off of two adjacent pegs and knit them together (as if they were one stitch). Then put that stitch back on one of those pegs. Repeat this process until there is only one loop left on each peg (you should have half as many pegs with loops on them as when you started). Cut your yarn leaving a long tail and thread it through all of the remaining loops. Pull tight and knot off. Congratulations, you have now completed your very own hand-knit scarf!

What You’ll Need

A loom: You can find a loom at most craft stores, or online. The size of the loom you need will depend on the width of the scarf you want to make. For a wide scarf, you’ll need a wide loom; for a skinny scarf, you’ll need a skinny loom.

Yarn: Again, the type and thickness of yarn you use is up to you. Just make sure it’s not too thick or too thin for your chosen loom.

A knitting hook: This is a special kind of crochet hook that is used to work with looms. You can find them at most craft stores, or online.

Scissors: You’ll need these to cut the yarn when you’re finished knitting.

Now that you have everything you need, let’s get started!

Step One: Casting On

Before you can start loom knitting, you need to cast on. This just means creating a foundation row of stitches that you can then work into. To cast on, you’ll need a knitting loom and some yarn. The size of the loom will determine how wide your scarf will be, and the type of yarn you choose will affect the weight and color of your scarf.

To get started, tie your yarn around the first peg at the end of the loom, making sure to leave a long tail. This tail will be used later to finish off the scarf. Then, wrap the yarn around each successive peg until you’ve gone all the way around the loom once. You should now have one loop of yarn on each peg.

Next, take the working end of the yarn (the end that’s not attached to the ball) and wrap it around each Peg a second time. You should now have two loops of yarn on each peg. Be careful not to pull too tight – you want your stitches to be loose enough to easily slide off the pegs when you’re finished knitting.

Now you’re ready to start knitting!

Step Two: Knitting the Scarf

Now that you have your loom set up and your yarn ready to go, it’s time to start knitting your scarf!

In this step, you will begin knitting the actual scarf. To do this, you will need to follow these five easy steps:

1. Take the first strand of yarn and wrap it around the first peg on the loom, going from left to right.

2. Take the second strand of yarn and wrap it around the second peg on the loom, also going from left to right.

3. Continue wrapping the yarn around each peg until you reach the last one.
At this point, you should have one strand of yarn wrapped around each peg on the loom.

4. Now, take the first strand of yarn (the one on the far left) and wrap it over the second strand of yarn (the one next to it). Then take that same strand of yarn and pull it through the hole created by wrapping it over peg two.You should now have two strands of yarn on peg one.

5. Repeat step four for each remaining strand of yarn on the loom until you have only one strand of yarn left on each peg.

Step Three: Binding Off

To bind off your scarf, cut the yarn, leaving a long tail. Insert your crochet hook into the first stitch on the needle and pull the yarn through. Insert the hook into the next stitch and pull the yarn through both stitches. Repeat this until you have only one stitch left on the needle. Pull the yarn through this last stitch and knot it to secure.

Finishing Touches

The finishing touches on your loom knit scarf are just as important as the rest of the process. You will want to make sure that your scarf is well-blocked, trimmed, and seamed before you wear it or gift it to someone special.

Blocking: Blocking is a process of wetting and drying your scarf so that it holds its shape. This is particularly important if your scarf is made with a delicate yarn or has a lacy stitch pattern. You will want to pin your scarf out to the dimensions you desire, wet it with cool water, and then allow it to air dry.

Trimming: Once your scarf is dry, you will want to trim any loose ends. Be sure to use sharp scissors and trim as close to the edge of the knit fabric as possible.

Seaming: If you used a non-stretchy yarn for your scarf, you will need to seam the ends together before you can wear it. You can do this by threading a tapestry needle with matching yarn and sewing the ends together using a basic whip stitch.

Tips and Tricks

Loom knitting is a fun and easy way to knit a scarf without having to use traditional knitting needles. It’s a great project for beginners, and it’s also a great way to make a quick and easy gift. Follow these five easy steps and you’ll be loom knitting like a pro in no time!

1. Choose your loom. There are many different types and sizes of looms available, so it’s important to choose one that is comfortable for you to use. You may want to try out a few different types before you decide which one is right for you.

2. Choose your yarn. You can use any type of yarn for loom knitting, but it’s important to choose one that is not too bulky or too thin. A medium-weight yarn works well for most projects.

3. Cast on your stitches. To cast on, start by tying a slip knot around one of the pegs on your loom. Then, wrap the yarn around the next peg and bring it back around the first peg (this will create two loops on the first peg). Continue wrapping and looping the yarn around each peg until you have the desired number of stitches (usually between 20 and 30).

4. Start knitting! To start knitting, simply lift the bottom loop over the top loop on the first peg (as if you were tying a shoe). Then,wrap the yarn around the next peg and pull it over the top loop (as if you were tying a second shoe). Continue wrapping and pulling until you reach the last peg, then turn your work so that the empty side of the loom is facing you again.

5. Finish your scarf! To finish your scarf, simply knit off all of your stitches by lifting each loop over the next until only one loop remains on each peg. Cut your yarn, leaving about a 6-inch tail, and thread it through all of the loops on your pegs (as if you were threading beads onto a string). Remove your scarf from the loom and tie off the end with a knot.

Knit Scarf Patterns

If you’re looking for a unique and stylish knit scarf pattern, you’ve come to the right place. Looming is a popular new knitting technique that let’s you create professional-looking garments without having to use traditional knitting needles. In this five-step guide, we’ll show you how to loom knit a scarf using the simplest of stitches.

Before you start, you’ll need to gather a few supplies. For this project, you will need:

-a loom with at least 24 pegs (we recommend using a round loom for beginners)
-a skein of worsted weight yarn in your desired color (make sure to get enough yarn to complete your project – generally one skein is sufficient for a scarf)
-a loom hook
-scissors

Step One: Getting Started
The first step is to secure your yarn onto the starting peg of your loom. You can do this by tying a basic overhand knot, or by wrapping the yarn around the peg until it feels snug. Once your yarn is attached, begin wrapping it around each successive peg until you have reached the end of the loom. When you get back to the starting peg, give your yarn a little tug so that all of the pegs have an equal amount of tension. This will ensure even knitting as you move on to step two.

Step Two: The Knit Stitch
The second step is to begin working the “knit stitch”; this is the most basic stitch used in looming and is accomplished by simply moving the bottom strand of yarn over the top strand and off of the peg. To do this, hold the working yarn (the tail end) in your left hand and insert your loom hook under both strands of yarn on the peg (as shown in Figure 1). Next, bring the hook over both strands (Figure 2) and pull through until there is only one loop on the hook (Figure 3). Now simply slide both loops off of peg (Figure 4), allowing them to fall down into position as shown in Figure 5. You have now completed one “knit stitch” – congrats! Just continue working in this manner until all pegs have been worked once.

Loom Knitting for Beginners

If you’re new to loom knitting, don’t worry – it’s easy to learn! In just a few easy steps, you can be on your way to creating beautiful projects like scarves, hats, and more.

To get started, you’ll need a loom (a circular one is best for beginners), some yarn, and a crochet hook. You can find all of these items at your local craft store.

Once you have your materials, follow these five easy steps to loom knit a scarf:

1. Choose the right size loom for your project. For a scarf, you’ll need a medium or large loom.

2. Cast on your stitches. To do this, wrap the yarn around each peg on the loom, going from left to right. You should have one loop of yarn around each peg when you’re finished.

3. Knit the first row. To do this, simply lift the bottom loop of yarn over the top loop and off the peg. Continue until you’ve gone all the way around the loom once.
4. Purl the second row by bringing the yarn from back to front around each peg instead of from front to back. Continue until you’ve gone all the way around once again.
5. Repeat steps three and four until your scarf is the desired length! Then, cut the yarn and tie it off on one of the pegs.

And that’s it – you’ve now completed your first loom knit scarf!

FAQs

Q: Do I need a loom to knit a scarf?
A: No, you can use a regular knitting needle, but it will be more difficult to keep your stitches even.

Q: What type of yarn should I use?
A: You can use any type of yarn, but a medium-weight yarn is best. Avoid using a very slippery yarn, as it will be difficult to work with.

Q: How long does it take to knit a scarf?
A: It depends on how wide you want your scarf to be and how fast you knit. A general rule of thumb is that it takes about 1 hour for every 4 inches of width. So, if you want your scarf to be 6 inches wide, it will take you about 1 1/2 hours to knit it.

Scroll to Top